- Carbon Vacuum Gripper, 240X120 mm, with integrated vacuum generator, vacuum pump with NO vacuum control and NC blow-off control, foam gripping interface mini type, holes Ø12 mm mounting Ø63 mm (ISO 9409-1-63-4-M6)
ref. : CVGC240X120QF2SXHXM2VVAA63 -
- characteristics
-
dimension (D) 240x120mm Tensile force (Ft) 180N Gripping Interface (InterF) foam, Ø12mm Air drawn in (aa) 550Nl/min Robot Mounting interface (Fix) ISO 9409-1-63-4-M6 Weight (Mas) 1.3KG Interface type (Tinter) mini HOLE/CUP PATTERN LAYOUT (DIsPoin) staggered Generator Control (PG) NO/NC Air consumed (ca) 280Nl/min Maximum load (Ch.m) 38KG
- Note
* Indicative force for a gripper with gripping interface covered 100% by the load, including a safety factor of 2 for horizontal handling, on a rigid and airtight surface. - Vacuum Control
- Dimensions Gripper
(Note: all dimensions are in mm) - Dimensions Mounting Interface
Note : toutes les côtes sont indiquées en mm - Mounting Interface
- Dimensions Gripping interfaces
Number of holes :
CVGC240X120_ : 42
CVGC320X160_ : 87
CVGC350X250_ : 160 - Electrical Connections
(1) 24 V DC suction command, depending on version:
- S: 24 V DC vacuum control
- V: 24 V DC vacuum off command - General Characteristics
Operating temperature: from 0°C to 50°C (32°F to 122°F)
Materials:
- Gripper: carbon, brass, stainless steel, high-density EPDM foam
- Foam gripping interface: EPDM
- Suction cup gripping interface: NR, aluminum, steel
- Supply: non-lubricated air, filtered to 5 microns, according to standard ISO 8573-1:2010 [3:4:4]
- Operating pressure: from 2 to 7 bar
- Optimal dynamic pressure: 5.5 bar
- Pressure Connection: Ø8 mm elbow quick connector - G1/4", with
200 μm filter screen
- Multi-stage Mini Vacuum Pump CMSM90X30_: Equipped with a
removable 200 μm vacuum filter screen
- Max Vacuum: 80%
- Air Suction Flow Rate: 550 Nl/min
- Air Consumption: 280 Nl/min
- Noise Level: 72 dB (at 50%- vacuum, at optimal pressure)
- Protection Rating: IP40
- Max Operating Frequency: 2 Hz
- M12-5 pin connector -
3D Model
To generate the 3D file in the required format, we use the TRACEPARTS platform. To download the file, please use your TRACEPARTS username and password.